Samsung OfficeServ DS-5012L User Manual Download Page 138

Page: 138 / 187

Navigation Menus

DS/ITP-5012L Phone User Guide

125

Move to the desired menu and press the

[Enter]

button.

Search by Speed Dial Number
Location

You can search for a telephone number based on the speed dial numbers
registered with the phone.

Press the

[Menu]

button and use the direction buttons to select

[1. Search]

[1. By Speed Dial No]

Then, press the

[Enter]

button.

When the speed dial number

entry screen appears, enter the
speed dial number and press
the

[Enter]

button.

The telephone number corresponding to the entered number is dis-

played.

If you press the [Enter] button without entering the speed dial number, a list
of all phone numbers will be displayed.

Press the

[Send]

button to dial the selected telephone number.

To change or delete the speed dial number, press the [Menu] button.

When the popup menu appears, select the desired menu (Edit / Delete /
New Entry).

Summary of Contents for OfficeServ DS-5012L




























































































































































































Search results

Summary of Contents for OfficeServ DS-5012L

Reviews:

Related manuals for OfficeServ DS-5012L

Brands by name

Popular brands

Samsung OfficeServ DS-5012L, User Manual

Search results

Summary of Contents for OfficeServ DS-5012L

Reviews:

Related manuals for OfficeServ DS-5012L

Brands by name

Popular brands