Samsung OfficeServ DS-5012L User Manual Download Page 136

Page: 136 / 187

Navigation Menus

DS/ITP-5012L Phone User Guide

123

[ ] button is used

- When moving the cursor to the left in menu mode.

Cancel Button

- Moves to the previous stage of menu mode.
- Deletes the entered letter or number.
- Cancels menu mode.

End Button

- Disconnects the call.
- Exits from menu mode.

2. Entering Menus

When the phone is in standby mode, press the

[Menu]

button on the Navi-

gation buttons. The Phone Menu appears on the LCD screen.

Selecting Menus

Use the direction buttons to move to the desired menu (icon). Then, press
the

[Enter]

button.

Alternatively, press the dial button corresponding to the number of a menu,
1–7 (e.g. P-Book is 1 and My-Phone is 7).

Summary of Contents for OfficeServ DS-5012L




























































































































































































Search results

Summary of Contents for OfficeServ DS-5012L

Reviews:

Related manuals for OfficeServ DS-5012L

Brands by name

Popular brands

Samsung OfficeServ DS-5012L, User Manual

Search results

Summary of Contents for OfficeServ DS-5012L

Reviews:

Related manuals for OfficeServ DS-5012L

Brands by name

Popular brands