Configuring the IP Phone
DS/ITP-5012L Phone User Guide
14
The next menu to appear will display different options depending on your
selection. These are described next. If you selected
[2. DHCP]
your settings
are automatically completed and you can proceed to
Load & Upgrade Set-
tings
, below.
Setting Manual IP
If you selected the
[1. Manual IP]
menu you see the following options:
1.
Select
[2. IP]
to display the phone’s current
IP address. (No address is displayed if an IP
address has not yet been set.)
Use the dial buttons [0] to [9] and [
4
] to enter a new IP address, and
press the
[Enter]
button.
(Note: Take care not to enter a duplicate IP address as the network does not sup-
port redundant IP addresses.)
2.
Select
[3. Netmask]
to display the current
Netmask address. To change the Netmask
address, enter a new value and press
the
[Enter]
button.
