OfficeServ 7400
INSTALLATION
TECHNICAL MANUAL
PART 7 MAY 2010
7.16
WALL-MOUNTING iDCS KEYSETS
iDCS keysets come equipped with a reversible base wedge. To wall-mount a keyset, remove
the wedge from the keyset and mount the wedge to the wall using one of the methods below
Use screw holes 1 and 2 to attach the base wedge to a standard electrical outlet box.
OR
Use screw holes 1 and 3 to attach to a standard telephone wall-mount plate with locking pins.
This method can cause the keyset to wobble as the keyset feet do not fit securely to the
mounting surface.
1
2
3
Figure 7.20 Wall-Mounting an iDCS Keyset
WALL-MOUNTING DS, ITP-5121D and ITP-5107S KEYSETS
DS, ITP 5121D and ITP 5107S keysets come equipped with a reversible base stand. To wall-
mount a keyset, remove the base stand, reverse it, and attach stand in the bottom slots of the
keyset. Use screw holes 1 and 2 to attach the keysets to the wall
To secure the handset once you have wall-mounted your keyset, you must remove the
handset retaining clip and reverse it such that the extended clip is facing the top of the phone
Home Page
Table of Contents
Home Page
Table of Contents
Home Page
Table of Contents
