OfficeServ 7200-S
INSTALLATION
TECHNICAL MANUAL
PART 7 MAY 2010
7.34
Figure 7.29 OIT and Modem Connection
5.
Input the Telephone number (e.g. 972-372-4812).
6.
Input the Com Port (e.g. COM1).
7.
Input the Baud Rate (e.g. 38400bps).
8.
Click [Apply].
9.
Dialog box shows: “Do you want to apply new setting value?”
10.
Click [Yes].
11.
Dialog box shows: “The new setting value is applied.”
12.
Click [OK]. Click [Close].
13.
Click [System]. Click [Connect].
14.
Enter Password [Samsung], then [OK].
NOTE: Internal modem card must be installed for the connection to work. The incoming
telco line may need to be programmed to ring directly to modem port of OfficeServ
7200-S system in MMC 406 (e.g. Trunk 701 ring to port 3999).
Home Page