OfficeServ 7200-S
INSTALLATION
TECHNICAL MANUAL
PART 7 MAY 2010
7.33
INSTALLATION TOOL AND LAN CONNECTION
1.
Execute OIT.
2.
Click [System] -> [Link Control] menu to set the communications link.
Figure 7.28 OIT and LAN Connection
3.
Enter System name (e.g. ABC Company).
4.
Select the <link type> (e.g. LAN).
5.
Input the IP address (e.g. 192.169.9.209).
6.
Click [Apply].
7.
Dialog box shows: “Do you want to apply new setting value?”
8.
Click [Yes].
9.
Dialog box shows: “The new setting value is applied.”
10.
Click [OK]. Click [Close].
11.
Click [System]. Click [Connect].
12.
Enter Password [Samsung], then [OK].
INSTALLATION TOOL AND MODEM CONNECTION VIA TELCO LINE
This example is based on a PC using an internal modem card. Connect Telephone line cord
from internal modem connection of PC directly to loop start telco line.
1.
Execute OIT.
2.
Click [System] -> [Link Control] menu to set the communications link.
3.
Enter System Name (e.g. ABC Company).
4.
Select the <link type> (e.g. MODEM).
Home Page
