Samsung NV51 700S Series, User Manual

Page: 62 / 72

62 English
Maintaining y
our
appl
ianc
e
Maintaining your appliance
A
B
A. Oven door hinge lock in locked
position
B. Oven door hinge lock in unlocked
position
3. Open the oven door.
4. Locate the oven door hinge locks in both
corners of the oven door, and then rotate
the hinge locks toward the oven door to the
unlocked position. If the door hinge lock is
not rotated fully (see illustration B on the
left for an example of full rotation), you will
not be able to remove the door properly.
5. Partially close the door to engage the door
latch locks. The door will stop at this point.
6. Using two hands, grasp the edges of the
oven door. Lift and pull the oven door toward
you and remove. You may need to gently
shift the door from side to side as you pull.
7. Set the oven door aside on the prepared
covered work surface with the oven door
resting on its handle.
Removing the oven doors
CAUTION
• The door is very heavy. Be careful when removing and lifting the door.
• Use two hands to remove an oven door. For double ovens, repeat the process for each
door.
A
A. Wire Harness
1. Prior to removing the oven door, prepare a
surface where you will place it. This surface
should be flat and covered with a soft
blanket. You can also use the corner posts
from your packaging material.
2. Remove the rubber cap and then disconnect
the LED light's Wire Harness from the
bottom right of the door.