Samsung NP-P40 User Manual Download Page 193

Page: 193 / 290

3-14

Manual

Using Samsung Theme

Samsung Theme is a program that enables a user to easily switch a
theme (desktop, logon screen and sound effect).

Double-click the Samsung Theme (

) icon on the desktop.

(Or select Start > All Programs > Samsung > Samsung Theme >
Samsung Theme

▶

Samsung Theme

Switches to Samsung Theme (desktop, logon screen
and sound effects on booting).

▶

Windows XP Theme

: Switches to the Windows XP default Theme.

▶

Back

Restores the theme to its previous status.

Help button
Close button

Move the mouse pointer
over Samsung Theme
item, then the Samsung
Theme will be displayed
below.

Summary of Contents for NP-P40



































































































































































































































































































Search results

Summary of Contents for NP-P40

Reviews:

Brands by name

Popular brands

Samsung NP-P40, User Manual

Search results

Summary of Contents for NP-P40

Reviews:

Brands by name

Popular brands