Samsung ND-L6013R, User Manual, Page: 60 / 170

60_ network connection and setup
network connection and setup
3. In the < address > pane, provide the
necessary information.
• MAC (Ethernet) Address : The MAC
address imprinted on the camera
label is automatically displayed and
requires no user setting.
M
`
IP related parameters can be set only
when DHCP is not checked.
if not using a Broadband router
For setting < ip address >, < Subnet mask >, and < Gateway >, contact your network
administrator.
4. In the < port > pane, provide necessary
information.
• HTTP Port : Used to access the
camera using the Internet browser,
defaulted to 80.
• VNP Port : Used to control the video
signal transfer, defaulted to 4520.
5. Enter the password.
Enter the password of “ admin ” account, which was used to access the camera.
J
`
For the security purposes, you are recommended to use a combination of numbers, alphabets
uppercase and lowercase and special characters for your password.
` If you want to change the password, refer to “ Administrator password change ” of the user
setup. (page 87)
6. Click [ oK ].
Manual network setup will be completed.