Samsung ND-L6013R User Manual Download Page 38

Page: 38 / 170

installation & connection

38_

installation & connection

inStaLLation (Snv-L6083r)

This camera is waterproof and in compliance with the IP66 spec, but the jack connected to the

external cable is not. You are recommended to install this product below the edge of eaves to

prevent the cable from being externally exposed.

precautions before installation

Ensure you read out the following instructions before installing the camera:

•

It must be installed on the area (ceiling or wall) that can withstand 5 times the weight

of the camera including the installation bracket.

•

Stuck-in or peeled-off cables can cause damage to the product or a fire.

•

For safety purposes, keep anyone else away from the installation site.

And put aside personal belongings from the site, just in case.

Disassembling

With the provided L-wrench, loosen

3 bolts on the dome cover counter

clockwise to remove the cover.

FRONT

ACT LINK

NETWORK

FRONT

ACT LINK

NETWORK

Dome cover

Camera Case

Bolts

Camera Body

Summary of Contents for ND-L6013R











































































































































































Search results

Summary of Contents for ND-L6013R

Reviews:

Related manuals for ND-L6013R

Brands by name

Popular brands

Samsung ND-L6013R, User Manual

Search results

Summary of Contents for ND-L6013R

Reviews:

Related manuals for ND-L6013R

Brands by name

Popular brands