Samsung ND-L6013R User Manual Download Page 32

Page: 32 / 170

32_

installation & connection

inStaLLation (SnD-L6013/SnD-L6013r/SnD-L6083r)

precautions before installation

Ensure you read out the following instructions before installing the camera:

•

It must be installed on the area (ceiling or wall) that can withstand 5 times the weight

of the camera including the installation bracket.

•

Stuck-in or peeled-off cables can cause damage to the product or a fire.

•

For safety purposes, keep anyone else away from the installation site.

And put aside personal belongings from the site, just in case.

Disassembling

Use one hand to hold the camera’s bottom part

and turn the cover counterclockwise with another

hand to separate it.

Lift up the inner cover to separate it.

NETWORK

ACT LINK

FRONT

NETWORK

ACT LINK

FRONT

NETWORK

ACT LINK

FRONT

Summary of Contents for ND-L6013R











































































































































































Search results

Summary of Contents for ND-L6013R

Reviews:

Related manuals for ND-L6013R

Brands by name

Popular brands

Samsung ND-L6013R, User Manual

Search results

Summary of Contents for ND-L6013R

Reviews:

Related manuals for ND-L6013R

Brands by name

Popular brands