Samsung ND-L6013R User Manual Download Page 35

Page: 35 / 170

English

_35

●

aLL

ation & connection

How to connect the rJ45 waterproof cable to a Lan cable

Insert it through the arrow direction.

Connect the LAN connector (male) to the

cable.

Connect the RJ45 modular jack (female) to

the RJ45 connector (male).

Please, keep each of the parts separated.

Assemble by rotating the RJ45 modular

jack (female) and the RJ45 protection cover

clockwise (Follow the arrow).

Assemble by rotating RJ45 protection cover

and back cover clockwise (Follow the arrow).

When the back cover is assembled, the cable

waterproof gasket is tightly attached to the

cable to make it waterproof.

You must fully assemble it to rotate the back cover up to the end of the screw thread of the RJ45

connector.

RJ45 connector

(male)

RJ45 modular

jack (female)

RJ45 connector

protection cover

Back cover

Cable waterproof

gasket

Summary of Contents for ND-L6013R











































































































































































Search results

Summary of Contents for ND-L6013R

Reviews:

Brands by name

Popular brands

Samsung ND-L6013R, User Manual

Search results

Summary of Contents for ND-L6013R

Reviews:

Brands by name

Popular brands