setup screen
100_
setup screen
to Set oSD
1.
Select <
oSD
>.
2.
Select each item and set it properly.
•
Camera title : It specifies the name
of the camera to be displayed on the
screen.
•
Camera title X, Y : It specifies the
position of the camera name on the screen.
•
Date & time : Set the time display and date formats on the screen.
•
Date & Time X, Y : Specify the position of time display on the screen.
•
Weekday overlay : Specify the use of date display date on the screen.
J
`
A position-adjustable item (Camera title, Date & Time) may not be displayed normally if it overlaps
with another fixed OSD item.
to Set ir
1.
Select <
ir
>.
2.
Select each item and set it properly.
•
Mode : When the IR indicator turns
on in B/W mode, the screen will be protected from saturation on the center area
so that you can identify a short-distant object.
- Off : IR mode will be disabled.
- Auto : Adjust the IR brightness according to the brightness of the object on the
center screen.
M
`
SND-L6013 is not supported.
Summary of Contents for ND-L6013R
