18
1) Check the sensor and the sensor holder.
2) Put the sensor on the pipe.
Sensor attachment method.
• Choose the location where temperature can be measured correctly.
(Refer to page 16)
• Try to attach closely to the contact surface.
• Do not use the sensor holder.
IN/OUT sensor installation example 2
3) Hold the sensor and put aluminum tape around to fix the
sensor.
5) Use cable-tie to tighten the sensor around the pipe.
Cable-tie
6) Attach the insulator around the sensor.
Insulator
4) Put rubber tape around the sensor.
Type
Sensor OD (mm)
Sensor holder ID
(mm)
IN sensor
Ø 6
Ø 6.8
OUT sensor
Ø 7
Ø 7.8
Rubber
tape
Sensor
Sensor
Pipe
Aluminum
tape
Sensor
Aluminum tape
Sensor
Insulator
Cable-tie
Rubber tape
INSTALLATION
(Continued)
Note
Note
MXD-A16K1X025A_E_31836-1.indd 18
2010-03-12 ｿﾀﾈﾄ 12:43:04
