28
Field setting mode
English
Fiel
d S
etting Mode
External Room Thermostat (Field Option)
࡙
Terminal #1 (#2091, Default 0 for no usage), #2 (#2092, Default 0 for no usage)
ࣕ
To use wired remote controller for heating/cooling operation, both of the above settings should be
set to 0 simultaneously. If not, thermostat controls system.
ࣕ
To use the External Room Thermostat option, set the 2-zone control option (FSV #4061) to "0" for
disabling it.
ࣕ
If set to #2091/#2092 1, the compressor can be turned on or off only by the thermostat.
ࣕ
If set to #2091/#2092 2~4, the compressor can be turned on or off by the thermostat or according
ϩͱϩ˵ʪǮøʒ̈ϑʀ˵ɇθ˝ʪʒиɇϩʪθϩʪ͔ΧʪθɇϩЇθʪࢋ࣍ࢄߣߡߪߣߣࡡǮøƟ˵ʪθ͔ͱͱ˙˙२ǮɇϩʪθΧЇ͔Χͱ˙˙ࡡࢄߣߡߪߣߤࡡǮø
Ɵ˵ʪθ͔ͱͱ˙˙२ǮɇϩʪθΧЇ͔Χͱ͝ࡡࢄߣߡߪߣߥࡡǮøƟ˵ʪθ͔ͱͱ˙˙२ǮɇϩʪθΧЇ͔Χߨ͔̈͝ͱ˙˙२ߤ͔̈͝ͱ͝२ࢋࢋࢋࢋࢋࢋࢋ࣎ࢋ
1
0
#2092 2,
1
0
#2092 3,
1
0
#2092 4,
Water pump
Water pump
1min
3min 7min
7min
3min
ON
ON
Time
Time
Time
Time
Time
Time
ON
OFF
OFF
OFF
Water pump
Water law
Thermo
Water law
Thermo
Water law
Thermo
ࣕ
Types of water law used by room thermostat operation will follow the FSV settings defined in #2041
࣍˵ʪɇϩ̈͝˝࣎ɇ͝ʒࢄߣߡߩߢ࣍ʀͱͱ̷̈͝˝࣎θʪϑΧʪʀϩ̈Эʪ̷цࢋ
ࣕ
During the thermostat operation, the user has the possibility to shift up or down the target water
ϩʪ͔ΧʪθɇϩЇθʪӥϩ˵̈͝ϩ˵ʪθɇ͝˝ʪͱ˙ࣗߦॄफ़ߦঐࢋ
