16
English
Installation/S
ervic
e mode
Additional functions of the Wired Remote Controller
1
If you want to use the various additional functions for your Wired Remote Controller, press the
and buttons at
the same time for more than 3 seconds.
࡙
The password entry screen appears.
2
Enter the password, 0202, and then press the
button.
࡙
The settings screen for installation/service mode appears.
3
See the list of additional functions for the Wired Remote Controller on the next page, and then
select the desired menu.
࡙
Once you have entered the setting screen, the current setting appears.
࡙
Refer to the chart for data setting.
࡙
Using the
/
buttons, change the settings and press the button to move to the next setting.
࡙
Press the
button to save the new setting.
࡙
Press the
button to move to the Home screen.
NOTE
࡙
While setting the data, you can press the
button to move to the Home screen after checking the
saving status at a pop-up screen.
Installation/Service mode
