4. Troubleshooting
4.5.6.14. SFE (Special Feature Enablement)
•
Service Functions > SFE
Special Feature Enablement (SFE) means to provide the configurable options (On/Off) in service mode for technicians or
dealers to satisfy the requirements from B2B sites easily without changing the firmware installed in a device.
NOTE
Some menus may not appear on the display depending on the model.
SFE menu description
SFE
Code
Title
Description
001
Letterhead/Preprinted paper handle
If this option is enabled, in case of printing in directional media
(Letterhead/Preprinted), the device prints as the same output direction
regardless of simplex or duplex.
003
CCC mode
To meet CC(Common Criteria) confirmation, security function is changed to
the required specification from IEEE P2600.1.
007
1 dot line compensation
If this option is enabled, the device prints as original 1 dot line without 2 dot
line compensation.
008
Ignore paper size command
If this option is enabled, the device ignores paper size command in PRN and
prints as paper size in tray.
009
HPOS compatibility
PJL readback response is changed with HPOS.
1) Add <CR><LF> to EOJ response.
2) No EOJ job but EOJ response occurs.
3) Device uses Job name instead of EOJ name.
010
Power Save Time Range
If this option is enabled, maximum value of 'Power save time' is increased
as 240 min.
012
Deletion of Print Job in jam status
If this option is enabled, print job is deleted in jam status.
013
Ignore USB memory stick (Code :
013)
If this option is enabled, the device ignores the USB memory stick and detects
only card reader.
014
Fullfil default [TO] address of
authenticated user (Code : 014)
When the authenticated user uses scan to email, their email address is added
automatically.
015
LDAPs get default form address after
Kerberos authentication
Ths system should support to connect to LDAPs server without any certificate.
"When the system queries user's E mail information to LDAP server, the
system should use ""Kerrberos Authentication"" domain data. Namey, LDAP
Query should include domain data (DC=""Realm name or Domain name"")
from Kerberos Realm selected for authentication." "The system should get the
proper user E mail information according to Kerberos Domain information
eventhough there are LDAPs DB in the network.. (Ex. Default From Address)"
016
Full Image TCR Print
Supports Image Appearance to be printed with fit to report page. This SFE
option will be applied to "Send Confirmation" or "Fax Send Confirmation"
reports.
•
Enable : Image Apprearance fit to report page
•
Disable(default) : Image Apearance reduced on the half page.
4-70
Copyright© 1995-2013 SAMSUNG. All rights reserved.