iDCS 500 Release 2 / OfficeServ
INSTALLATION
TECHNICAL MANUAL
PART 3 MARCH 2004
3.19
LED Name
Function
Status
DSP
Displays if the DSP channel are being
used.
•
Off: All channels are not in
use.
•
Blinking (400ms): 1 to 7
channels are in use.
•
Blinking (200ms): 8 to 11
channels are in use.
•
Blinking (100ms): 12 to 15
channels are in use.
•
On: All voice channels (16
channels) are in use.
IPC
Displays the IPC status between the MGI
card and the system.
•
Blinking: IPC is in normal
status.
•
Off: IPC is not in normal a
status
MOD
Displays the operation status of the MGI
card.
•
OFF: The card has booted
and is operating normally.
•
ON: The card is not
normally on-line.
MGI 3 LED indication after booting:
RUN
ON ON
DIM
PWR
TX
BLINKING OFF
RX
SRV
ON OFF
DSP
IPC
ON OFF
MOD
3.31 E911 CARD
There are no options to be selected on the E911 card. The card has six (6) LEDs on it
to indicate the card and line status. These indications are described below. Insert the
card into any universal card slot.
Push firmly in the middle of both card
ejectors to ensure the card is firmly seated into the back plane connector.
Home Page
Table of Contents
