iDCS 500 Release 2 / OfficeServ
INSTALLATION
TECHNICAL MANUAL
PART 3 MARCH 2004
3.17
LED Name
Function
Status
RUN
Displays the power status.
•
On: Power to the MGI
card.
•
Off: No power to the MGI
card
RX
Displays reception of data through an
Ethernet connection.
•
Blinking: Data is being
received.
•
Off: Data is not being
received. after initialization
is complete.
TX
Displays transmission of data through an
Ethernet connection.
•
Blinking: Data is being
transmitted.
•
Off: Data is not being
transmitted.
SRV
Displays if card is in service.
•
On: Service is available.
•
Blinking: Program is being
modified or configuration is
being downloaded.
•
Off: Service is not
available.
DSP
Displays if the DSP channel are being
used.
•
Off: All channels are not in
use.
•
Blinking (400ms ): 1 to 7
channels are in use.
•
Blinking (200ms ): 8 to 11
channels are in use.
•
Blinking (100ms ): 12 to 15
channels are in use.
•
On: All voice channels (16
channels) are in use.
IPC
Displays the IPC status between the MGI
card and the system.
•
Blinking: IPC is in normal
status.
•
Off: IPC is not in normal a
status.
MOD
Displays the operation status of the MGI
card.
•
OFF: The card has booted
and is operating normally.
•
ON: The card is not
normally on-line.
Home Page
Table of Contents
