Samsung iDCS 500 Programming Manual Download Page 308

Page: 308 / 533

iDCS 500

PROGRAMMING

TECHNICAL MANUAL

PART 2 NOVEMBER 2001

MMC: 726

TRUNK FOR DN1:

If set to yes, when the voice mail auto attendant system

answers a call the iDCS 500 system will send data in the DN1 field indicating that
a trunk is ringing the VMAA port.

If set to no, when the voice mail auto attendant system answers a call the iDCS
500 system will not send trunk data in the DN1 field.

EXTENSION FOR DN2:

If set to yes, when the voice mail auto attendant system

answers a call the iDCS 500 system will send data in the DN2 field indicating the
originating station of the call ringing the VMAA port.

If set to no, when the voice mail auto attendant system answers a call the iDCS
500 system will not send station data in the DN2 field.

TRUNK FOR DN2:

If set to yes, when the voice mail auto attendant system

answers a call the iDCS 500 system will send data in the DN2 field indicating the
originating trunk of the call ringing the VMAA port.

If set to no, when the voice mail auto attendant system answers a call the iDCS
500 system will not send trunk data in the DN2 field.

SEPARATOR:

When both DN1 and DN2 are used, a digit defined here is sent

between DN1 and DN2 so the VMAA system can determine where DN 1 stops
and where DN 2 starts. The separator can be DTMF 0 through 9, A, B or C

DISCONNECT:

This is the call progress digit sent to the VMAA port in place of a

disconnect open. The digit defined here is sent three times.

CALLER ID:

If set to yes, when the voice mail auto attendant system answers a

call the iDCS 500 will send Caller ID data as DTMF tones to the VMAA port.

CALL TYPE ID:

This is the DTMF digit that is sent first in the in band digit string

and can identify any of the following call types:

0. DIRECT CALL

A call originating directly from another station in
the system.

1. ALL FWD CALL

This indicates that a call was forwarded to the
VM/AA port from a station with CALL FORWARD
ALL set.

2. BSY FWD CALL

This indicates that a call was forwarded to the
VM/AA port from a station with CALL FORWARD
BUSY set.

HELP

Table of

Contents

HOME

PAGE

Summary of Contents for iDCS 500






















































































































































































































































































































































































































































































































































Search results

Summary of Contents for iDCS 500

Reviews:

Related manuals for iDCS 500

Brands by name

Popular brands

Samsung iDCS 500, Programming Manual

Search results

Summary of Contents for iDCS 500

Reviews:

Related manuals for iDCS 500

Brands by name

Popular brands