Samsung HP-S4253, Owner'S Instructions Manual

Page: 131 / 144

131
How to Reset the TV after the V-Chip Blocks a Channel (“Emergency Escape”)
If the TV is tuned to a restricted channel, the V-Chip will block it. The screen will go blank and the
following message will appear:
1
Enter your PIN.
To resume normal viewing, tune to a different channel using CH
or CH
button.
Under certain conditions (depending on the rating of the local TV programs) the V-Chip might lock out
all the channels. In this case, use the V-Chip function for an “emergency escape”:
1
Press the MENU button. Press the
▲
or
▼
button to select “Setup”, then press the ENTER button.
2
Press the
▲
or
▼
button to select “V-Chip”, then press the ENTER button.
3
Enter your PIN then press the ENTER, and press the
▲
or
▼
button to temporarily disable the
V-Chip Lock.
Note
• If you forget the PIN, press the remote-control buttons in the following sequence, which resets the
pin to 0-0-0-0 : Power Off.
➔
Mute
➔
8
➔
2
➔
4
➔
Power On.
Channel Is Locked by
TV-PG[ S ]
Use the NUMBER buttons to enter your
pin number to unlock all channels.
Press EXIT to clear PIN.
Press MENU for main menu.
Channel Is Locked by
TV-PG[ L ]
Use the NUMBER buttons to enter your
pin number to unlock all channels.
Press EXIT to clear PIN.
Press MENU for main menu.
BN68-00991B-01Eng(118~131) 2/17/06 2:02 PM Page 131