Getting Started 6
Use the Travel Adapter
The travel adapter included
with your phone is a
convenient, light-weight
charger that rapidly charges
your phone from any 120/220
VAC outlet.
1.
Plug the large end of the
Travel Adapter into a
standard 120 VAC or 220 VAC wall outlet.
Important!:
For connection to an electrical supply not located in North
America, you must use an adapter of the proper configuration for
the power outlet. Use of the wrong adapter could damage your
phone and void your warranty.
2.
Insert the USB Data Cable into the Travel Adapter (see
above) and into the charger/accessory connector on the
upper right side of your phone, as shown here.
Important!:
You must unplug the adapter before removing the battery from
the phone during charging to avoid damage.
Low battery indicator
The battery indicator (
) in the upper-right corner of the
display indicates power level. Monitor the battery strength and
ensure your battery is adequately charged.
•
Five bars (
) indicate a full charge.
•
An empty battery icon (
) indicates a near empty battery.
•
A blinking empty battery icon (
) and a tone sounding indicate you
have two to three minutes before the battery is too low to operate the
phone.
If you continue to use your phone without charging its battery, the
phone will shut down.
Activating Your Phone
Contact your Wireless Provider and follow their instructions for
obtaining service, if necessary. We suggest that you read this
guide to fully understand the services your phone supports.
Warning!:
Your touch screen responds best to a light touch from the pad of
your finger or a non-metallic stylus. Using excessive force or a
metallic object when pressing on the touch screen may damage
the tempered glass surface and void the warranty (see
“Warranty
Information”
on page 105).
Correct
DA
TA
LINK CABLE
Incorrect
Correct
Incorrect
