33
Section 4: Understanding Your Contacts
This section details how you can manage your daily contacts by
storing their names and numbers in your Contacts list. You can
have your Contacts entries sorted by name.
Note:
Although the procedures in this section are written for the phone
keypad, you can also perform these procedures using the QWERTY
keypad.
Contacts
Up to 1000 entries can be stored in Contacts. Each entry can
have up to five associated phone numbers and one e-mail
address. Each phone number can be up to 32 digits in length,
including
2-Sec
or
Wait
pauses (For more information, refer to
“Manual Pause Calling”
on page 24), and associated names can
be up to 32 characters in length. You can assign the Speed Dial
numbers of your choice for each entry. You can also mark your
Contacts list as Restricted to prevent unauthorized viewing. (For
more information, refer to
“Restrictions”
on page 82.)
Tip:
Speed Dial
One-Touch Dialing
,
Two-Touch Dialing
, and
Three-Touch
Dialing
allow you to call numbers stored in Contacts faster.
Launch the Contacts Menu
1.
In Standby mode, press
Menu
➔
Contacts
.
Tip:
To launch the Contacts menu using a voice command — In Standby
mode, press and hold until the phone prompts, “
Say a command.
”
Say “
Go to Contacts
” into the microphone.
The following options appear in the display:
• Find
— Find a phone number By Name.
Tip:
You can also access the
Find
option from Standby mode, by pressing
Contacts
or by pressing the Navigation key Up.
• Add New Contact
— Add a number or e-mail address to your
Contacts.
• Speed Dial
— Assign a Contacts entry to a Speed Dial number.
(For more information, refer to
“Speed Dial”
on page 40.)
• Group
— Review, send messages to, add Contacts to, or rename
four out of your five groups. (For more information, refer to
“Contacts Groups”
on page 41.)
• Metro411
— Launches Metro411 Directory Assistance. (For more
information, contact your Wireless Provider.)
Tip:
You can also launch Metro411 from Standby mode by selecting
.
