27
If it recognizes the number, Voice Dial repeats it and dials
the number. If Voice Dial is not sure it has recognized the
number, it displays a choice list of up to three numbers and
prompts you with “
Did you say?
” followed by the first
number on the list.
4.
Say “
Yes
” to confirm the number or “
No
” to hear the next
one, or use the keypad to select the correct number from
the list. (See
“Voice SVC”
on page 76, for more
information.)
•
Press
Repeat
to say the name again.
•
Press
to exit VoiceSignal without dialing.
Pause Dialing From a Contacts Entry
•
If you voice dial a contact that contains 2-Sec Pause(s) simply wait for
the pauses to pass and the dialing to complete.
•
If you voice dial a contact that contains Wait(s), wait for the appropriate
prompt(s) from the number you are calling (credit card number, bank
account number, and so on) and enter the appropriate response(s).
Answering a Call
Incoming
When you receive a call, the phone displays one of the following:
•
If the caller can be identified, the caller’s number (or name if it’s in your
Contacts) appears in the display.
•
If the caller cannot be identified,
Call from unavailable #
,
Call from
restricted #
, or no number appears in the display.
Tip:
Assign pictures to Contacts entries. The entry’s assigned picture
appears in the display when you receive a call from that entry. (See
“Assigning a Picture to a Contacts Entry”
on page 38).
The phone continues to notify you of the call until one of the
following events occur:
•
You answer the call.
•
The calling party ends the call.
•
The call is sent to voicemail.
