30 -
English
C
onnections
To determine whether your television is
compatible, follow the instructions below.
1. Switch your television on.
2. Point the remote control towards the television.
3. Press and hold the
TV
button and enter the two-figure
code simultaneously corresponding to the brand of
your television by pressing the appropriate number
buttons.
Result: If your television is compatible with the remote
control, it will switch off.
It is now programmed to operate with the remote
control.
You can then control the television using the
following buttons.
Brand Codes
SAMSUNG
01,14,15,23,31
DAEWOO
19
EMERSON
21
GRADIENTE 30
HITACHI
10
JVC
11
LG
06,08,18
LOEWE
28
MAGNAVOX 04
MITSUBISHI 13
Brand Codes
NEWSAN
27
NOBLEX
25
PANASONIC
12,24
RCA
07,29
SANYO
05,20
SHARP
02,16,22
SONY
03
TELEFUNKEN 26
TOSHIBA
09
ZENITH
17
Button
Function
TV POWER
Used to switch the television on and off.
INPUT SEL.
Used to select an external source.
VOL
+
/
-
Used to adjust the volume of the television.
CH/TRK
( / )
Used to select the desired channel.
TV MUTE
Used to toggle the sound on and off.
0~9
Used to input number directly.
100+
Used to select channels over 100.
■
If several codes are indicated for your
television brand, try each one in turn until you
find one that works. If you replace the remote
control’s batteries, you must set the brand code
again.
Note
The various functions may not be able to be
controlled on all televisions. If you encounter
problems, operate the television directly.
Note
Setting the Remote Control
You can control part of another manufacturer’s TV
functions with this remote control.
• Buttons that can be controlled on your TV :
TV POWER, INPUT SEL., VOL
+
/
-
, CH/TRK ( /
),
TV MUTE, 0~9, 100+.
00995F-VR335_XAC-Eng1 2006.4.19 5:12 PM Page 30