STATION PAIR
This feature allows station to be assigned as a “pair”. That is to say a primary and secondary. Calling the pri-
mary station will make both stations ring. Selected features such as Message Notification, DND, Callback, and
Class of Service act as one station. This is convenient when an individual has two offices or an office exten-
sion and a cordless extension. NOTE: Not all system features are applicable to station pairs. Features designed
for a single user may conflict with paired stations.
SYSTEM ALARMS
A DISA alarm will warn the customer if the DISA security system has been triggered by too many incorrect
password attempts. The alarm can ring any station or group of stations and show an appropriate display at
the assigned stations.
SYSTEM MAINTENANCE ALARMS
The OfficeServ 7100 continuously performs internal system diagnostics. When either a major or minor fault
is detected the system can ring stations with an ALARM KEY assigned. The keyset display shows information
that includes the description, location and date and time stamp for each alarm.
A log of 100 alarms are stored in a buffer and can be reviewed at a display keyset or sent to a printer.
SYSTEM DIRECTORY
Each station, station group and outside line can have an 11 character directory name. This name will appear
on keyset displays to provide additional information about lines and stations.
TENANT SERVICE (1)
The OfficeServ 7100 supports only one tenant service.
TOLL RESTRICTION
There are 500 allow and 500 deny entries of 11 digits each. Each of these entries can apply to dialing classes
B, C, D , E, F and G. Expensive 976, 1-900, 411 and operator-assisted calls, as well as specific area and office
codes, can be allowed or denied on a per-class basis. Class A stations have no dialing restrictions and Class H
stations cannot make outside calls. Any outside line may be programmed to follow station toll restriction or
follow the toll restriction class assigned to it. Each station and trunk can have a different dialing class for each
ring plan.
Special Code Table
A Special Code Table of ten entries (four digits each) allows use of telephone company features such as CID
blocking (*67) or call waiting disable (*70) without interference to toll restriction or LCR. The Special Code
table allows use of these custom calling features on a per call basis.
TOLL RESTRICTION OVERRIDE
Program options allow system speed dial numbers to follow or bypass a station’s toll restriction class. In addi-
tion, users may make calls from a toll restricted station by using the walking class of service or authorization
code feature.
TONE OR PULSE DIALING
Outside lines can be programmed for either tone or pulse dialing to meet local telephone company require-
ments.
4.25
Home Page
Table of Contents
