RECALLS
Calls put on hold, transferred or camped-on to any station will recall to the originating station if not answered
within a programmable time. A recall that goes unanswered for the duration of the attendant recall timer will
recall to the system operator group. Hold, transfer, camp-on and attendant recalls have individual program-
mable timers. Calls recalling to buttons with tri-colored LEDs will flash amber.
RECALL TO OPERATOR
This function will allow the call to recall the operator instead of to the transferring station after the transfer
recall time expires.
REDIAL REVIEW
The Redial Review feature allows a review of the last number before dialing or allows access to the Call Log
Blocks if assigned. These Call Log Blocks record the last ten (10) numbers dialed. When the LNR key is pressed
the last number dialed is displayed.The log can then be scrolled using the Volume (Up/Down) keys and a pre-
viously dialed number can be selected.
REMOTE PROGRAMMING—PC
Remote programming allows the technician to access the system database from a remote location for the
purpose of making changes to the customer data.The Installation Tool is the proprietary, programming appli-
cation used to access and manipulate the database. The Installation Tool connects to the system via LAN,
WAN or serial modem connection to the MP10. This application runs on a PC (Windows 2000 or higher).
RING MODES
Time Based Routing - Plans
Each C.O. line can be programmed to ring at any station or station group. Each line can be assigned a ring
destination based on six (6) different ring plans based on time of day and the day of the week. The system
operator (intercom dial “0”) can also be a different station group for each ring mode.
Automatic / Manual
Ring destinations will automatically change based on time of day and day of week.
At any time the system can be manually forced into a specific ring plan. It will remain in this ring plan until
manually taken out.
Holiday Schedule
The system has a table of 20 dates that are used to define holidays. On a date designed as a holiday the sys-
tem will remain in a ring plan for that calendar day providing the system was already in that ring plan. This
feature will override the ring plan time table.
Temporary Override
At any time the system can be forced into a specific ring plan for a temporary period of time until the next
scheduled ring plan automatically takes effect.
RING OVER PAGE
Any outside line can be programmed to ring over a customer-provided paging system. Outside lines, door
phones and station groups may ring over page in the day or night mode.
4.23
Home Page
Table of Contents
