31
PROGRAMMED MESSAGES
When you will be away from your phone for any length of time, you can leave
a programmed station message. Display stations calling you will see this
message and be informed of your status or follow your instructions.
•
Dial
48
plus any of the message codes (
01–30
) listed on the back of this
user guide.
•
To cancel any of these messages you might have selected, dial
48
plus
00
.
•
Press
TRANSFER
to exit and store your selection.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the
handset or press the
SPEAKER
key.
You can have multiple programmed message keys (
PMSG
) and each one
can have a different message code:
•
Press any programmed message (
PMSG
) button. The message is set
and the button will light red. Press the button again to turn off.
•
Pressing another programmed message (
PMSG
) button will turn the
previous one off and set a different programmed message.
30
CONVENIENCE FEATURES
DO NOT DISTURB
Use this feature when you want to block calls to your keyset.
•
While on-hook, press the
DND
key or dial
401
. The
DND
key lights
steady red to remind you of this mode.
•
To cancel DND, press the
DND
key again or dial
400
. The
DND
light
turns off. You can make calls while in the DND mode.
NOTES:
1.
If the Hot Keypad feature has been turned off, you must first lift the hand-
set or press the
SPEAKER
key.
2.
If you place your keyset in DND mode and you do not have a
DND
key,
your
TSI
key will flash to indicate DND status.
ONE TIME DND
If you are on a call and you do not wish to be interrupted while on that call,
you can press the
DND
key and place your station in Do Not Disturb. When
you hang up at the end of the call, DND will be automatically canceled and
your keyset will be able to receive new calls. This feature requires a
DND
key.
MUTE
You can mute the handset transmitter or the microphone during any conver-
sation:
•
Press the
MUTE
key. It will light red.
•
To resume speaking, press the
MUTE
button again. The light turns off.
BACKGROUND MUSIC
When a music source is supplied, you may listen to music through the
speaker in your keyset:
•
While on-hook, press the
HOLD
button to hear music.
•
Press the
HOLD
button again to turn music off.
You can set the level of background music by using the
VOLUME
keys while
listening to the music. This does not affect the speakerphone level.
Home Page
Table of Contents
iDCS Keyset
Summary of Contents for DS 24D
Page 109: ...Home Page Table of Contents ...
Page 111: ...Home Page Table of Contents ...
