Samsung CLX-6220FX, Service Manual

Page: 119 / 168

Alignment & Troubleshooting
Service Manual
4-48
Samsung Electronics
● Code
08-003
08-010
● Error message
Original paper Jam
Original paper jam inside of scanner. Remove Jam
● Symptom and Possible Cause
At duplex scan, the leadedge of the document has not reached to the duplex sensor after scanning the front side.
● Possible Cause
1. Duplex sensor or actuator is defective.
2. There is the contamination on paper path or a defective assembly.
3. The Duplex Gate does not work properly.
4. Duplex motor is defective.
● Troubleshooting method
1. Check and clean the Duplex Solenoid, replace as is necessary.
2. Check and clean the Exit Roller, replace as is necessary.
3. Check the signals from the DADF Drive Board, replace as is necessary.