Samsung CLX-6220FX Service Manual Download

Page: 136 / 168

Alignment & Troubleshooting

Service Manual

4-65

Samsung Electronics

Inside the machine

1. Open the scan unit.

2. Open the inner cover using the handle.

3. Open the inner cover using the handle and

carefully remove the paper.

4. Pull up the paper jam levers to loosen the

tension on the rollers in the fuser unit, then

carefully remove the jammed paper out of the

area.

Note: Please be careful when working in this area

as the Fuser is hot.

5. Press down the paper jam lever to reapply

tension back to the fuser rollers in the fuser unit.

6. Close the inner cover.

7. Lower the scan unit gently and slowly until it is

completely closed. Make sure that it is securely

latched.

Be careful not to pinch your fingers!

Summary of Contents for CLX-6220FX









































































































































































Search results

Summary of Contents for CLX-6220FX

Reviews:

Related manuals for CLX-6220FX

Brands by name

Popular brands

Samsung CLX-6220FX, Service Manual

Search results

Summary of Contents for CLX-6220FX

Reviews:

Related manuals for CLX-6220FX

Brands by name

Popular brands