Samsung CLX-6220FX, Service Manual

Page: 117 / 168

Alignment & Troubleshooting
Service Manual
4-46
Samsung Electronics
● Code
08-000
08-001
● Error message
Original paper Jam
Original paper jam inside of scanner. Remove Jam
● Symptom and Possible Cause
The lead edge of the document failed to actuate the Registration sensor within the predetermined time after
initialization of Paper Pick up.
● Possible Cause
1. Pick up roller is defective.
2. Scan sensor or actuator is defective.
3. Document paper path is contaminated.
● Troubleshooting method
1. Check the paper path for a small piece of paper that may have been torn from an original; or foreign materials
such as paper clips, extracted staples, etc.
2. Check the condition of the Pick-up, Paper Feed Roller and DADF Rubber, it may have reached its PM interval.
3. Registration Sensor change
4. Registration Sensor drive Board change
5. Pick-up Solenoid change