Samsung CLX-6220FX Service Manual Download Page 159

Page: 159 / 168

Reference Information

Service Manual

6-1

Samsung Electronics

This chapter contains the tools list, list of abbreviations used in this manual, and a guide to the location space

required when installing this printer. A definition of tests pages and Wireless Network information definition is

also included.

6.1 Tools for Troubleshooting

The following tools are recommended for the safe and ease of troubleshooting.

6. Reference Information

Install Driver CD

Network S/W CD

• DVM(Digital Volt Meter)

Standard : Indicates more than 3 digits.

• Driver

Standard : “-” type, “+” type (M3 long, M3 short,

M2 long, M2 short).

• Tweezers

Standard : For general home use, small type.

• Cotton Swab

Standard : For general home use, for medical

service.

• Cleaning Equipments

Standard : An IPA(Isopropyl Alcohol)[1x space]

dry wipe tissue or a gentle neutral

detergent and lint-free cloth.

• Vacuum Cleaner

• Brush

• Software (Driver) installation CD ROM

Summary of Contents for CLX-6220FX









































































































































































Search results

Summary of Contents for CLX-6220FX

Reviews:

Brands by name

Popular brands

Samsung CLX-6220FX, Service Manual

Search results

Summary of Contents for CLX-6220FX

Reviews:

Brands by name

Popular brands