91
Voice Recognition
Nuance is an advanced speech recognition software used to activate a wide variety of functions on your phone.
Nuance software automatically voice activates (up to 2,000 contacts) for voice dialing and searching. No
pre-recording or training needed. Speak a contact name naturally to dial, and use your voice to look up contacts,
launch applications and navigate phone menus.
1.
In Idle mode, touch
Menu
➔
Applications
➔
Voice recognition
.
2.
At the voice prompt, say a command. The list of available commands is listed below.
Note:
This list of voice commands is briefly displayed.
Say a Command Options
•
Call <Name> <Location>
:
dials a name or number listed in your contact list. If multiple numbers exist (i.e. home,
work, or other) say the name and the number type (location).
•
Call <Number>
: dials a phone number.
•
Send Text <Name or #>
:
displays the Create Text Message screen.
•
Lookup <Name>
:
allows you use a voice command to locate and display contact information stored in the
Contacts list. For more information, refer to
“Finding a Phonebook Entry”
on page 48.
•
Go to <Menu>
:
accesses all the features of your phone if they are activated, such as: Web, Calendar, Ringtones,
Tasks, Phonebook, Voice mail, and Games and Apps.
•
Check <Item>
:
lets you check your phone's status in the same report (Status, Sinal strength, Network, Battery,
and My Phone Number).
While the Say a command screen displays you have two options:
•
Tutorial
: provides examples of how to use the voice commands.
•
Settings
: lists the settings for voice command software such as: Confirmation, Adaptation, Modes, Speakerphone, and About.
If the phone does not recognize your command the Command not recognized screen displays with two options:
•
Tutorial
: provides instructions on how to use voice commands.
•
Restart
: touch and try the command options again.
T919 Roxy.book Page 91 Thursday, September 25, 2008 5:01 PM
