Samsung AEN160YDEHA, Installation Manual

Page: 4 / 49

E-
4
Safety precautions (Continued)
P
OWER SUPPLY LINE
,
FUSE OR CIRCUIT BREAKER
X
Always make sure that the power supply is compliant with current safety standards.
Always install the air to water heat pump in compliance with current local safety standards.
X
Always verify that a suitable grounding connection is available.
X
Verify that the voltage and frequency of the power supply comply with the specifications and that the
installed power is sufficient to ensure the operation of any other domestic appliance connected to the
same electric lines.
X
Always verify that the cut-off and protection switches are suitably dimensioned.
X
Verify that the air to water heat pump is connected to the power supply in accordance with the
instructions provided in the wiring diagram included in the manual.
X
Always verify that electric connections (cable entry, section of leads, protections…) are compliant with
the electric specifications and with the instructions provided in the wiring scheme. Always verify that all
connections comply with the standards applicable to the installation of air to water heat pumps.
X
Make sure that you earth the cables.
- Do not connect the earth wire to the gas pipe, water pipe, lighting rod or telephone wire.
If earthing is not complete, electric shock or fire may occur.
X
Install the circuit breaker.
- If the circuit breaker is not installed, electric shock or fire may occur.
X
Make sure that the condensed water dripping from the drain hose runs out properly and
safely.
X
Install the power cable and communication cable of the indoor and outdoor unit at least 1m
away from the electric appliance.