E-
35
ENGLISH
WARNING
x
If you don’t follow the safety precautions, you may get the risk of serious wound
or death.
Safety information
(Before installing an DHW Tank, please read this manual thoroughly to ensure that you know how to
safely and efficiently install a new appliance.)
X
The installation must be done by the manufacturer or its service agent or a qualified person in order to
avoid a hazard.
- Installation by an unqualified person may cause a water leakage, electric shock or fire and so on.
X
The electric work must be done by service agent or qualified persons according to national wiring
regulations and use only rated cable.
- Use certified power cable in the market suggested here and do electric work according to installation
manual otherwise, electric shock or fire may occur.
X
Install the outdoor unit correctly according to the installation manual.
- An incorrect installation may cause a water leakage, electric shock or fire and so on.
X
Manufacturer is not responsible for accidents due to incorrect installation.
X
Use certified parts in the market and supplied parts from the factory.
- All wiring, components and materials to be procured on the site must comply with the applicable
local and national codes. If you don’t use the certified parts and tools, it can cause trouble to the air
conditioner and bring into injury.
X
Install the DHW Tank on a hard and even place that can support its weight.
- If the place cannot support its weight, the outdoor unit may fall down and it may cause injury.
X
Fix the outdoor unit securely on foundation it can fall over strong wind or earthquake.
- If the outdoor unit is not properly fixed, it turns over and accidents may occur.
X
Secure power cable with a conduit, which is accessory part for DHW tank, not to be pulled out by external
force.
- If fixing is incomplete, it can cause trouble with a heat generation, electric shock or fire and so on.
DHW tank
General information
X
SAMSUNG Eco Heating system with SAMSUNG DHW tank is designed to withstand SAMSUNG durability
and reliability requirements. We cannot guarantee neither good operation nor reliability of total system
with other brand tanks.
X
The piping, valves and system configuration of DHW tank system should be followed a relevant local or
national regulations.
X
A pressure relief valve in accordance with an opening pressure of max. 0.9MPa should be connected.
X
The electrical box must be opened by a licensed electrician.
X
Switch off the power supply before opening the electrical box lid.
X
Make sure that the installation location of DHW tank system including piping and valves is frost free.
DHW Tank shall be located and installed indoors (garage, multipurpose room, boiler room).
Summary of Contents for AEN160YDEHA
