Samsung AE071MNMPEH, Installation Manual, Page: 27 / 40

27
Ins
tallation Pr
oc
edur
e
English
Option setting Status
19 Setting SEG23, SEG24 mode
a Press Low Fan button( ) to enter SEG23 value.
b Press High Fan button( ) to enter SEG24 value.
Each time you press the button, will be selected in rotation.
SEG23 SEG24
5 After setting option, press button to check whether the option code you input is correct or not.
       

6
Press operation button with the direction of remote control for set. For the correct option setting, you must input the
option twice.
7 Check operation.
a Reset the indoor unit by pressing the RESET button of indoor unit or outdoor unit.
b Take the batteries out of the remote control and insert them again and then press the operation button.
Setting an indoor unit address (MAIN/RMC)
1 Check whether power is supplied or not.
– When the indoor unit is not plugged in, there should be additional power supply in the indoor unit.
2
Before installing the indoor unit, assign an address to the indoor unit according to the air conditioning system plan.
3
Assign an indoor unit address by wireless remote control.
The initial setting status of indoor unit ADDRESS(MAIN/RMC) is “0A0000-100000-200000-300000”.
Option No. : 0AXXXX-1XXXXX-2XXXXX-
3XXXXX
Option SEG1 SEG2 SEG3 SEG4 SEG5 SEG6
Explanation PAGE Mode Setting Main address
100-digit of indoor
unit address
10-digit of indoor unit
The unit digit of an
indoor unit
Indication
and Details
Indication DetailsI Indication Details Indication Details Indication Details Indication Details Indication Details
0 A
0
No Main
address
0~9 100-digit 0~9 10-digit 0~9
A unit
digit
1
Main address
setting mode