Samsung AE071MNMPEH, Installation Manual

Page: 37 / 40

37
Ins
tallation Pr
oc
edur
e
English
Step 16 Setting temperature control
of discharge air
1) Use of “Temperature control of discharge air” or
target temperature of discharge air in cooling/
heating can be set with the service mode of a wired
remote controller. (Refer to the installation manual
of a wired remote controller.)
2) When using temperature control of discharge air,
thermo on/off of Indoor unit is decided by set
room temperature and room temperature, and the
temperature of discharge air is adjusted to meet the
target temperature of discharge air in thermostat
On section.
3) When using temperature control of discharge air,
the temperature of discharge air cannot always be
adjusted to the target temperature due to external
conditions or protective control of the outdoor unit.
❋ ❋
Temperature control of discharge air can be set with
DMS as well.
Step 17 Performing the final check
To complete the installation, perform the following
checks and tests to ensure that the air conditioner
operates correctly.
1 Check the following:
• Strength of the installation site
• Tightness of pipe connection to detect gas leak
• Electric wiring connection
• Heat-resistant insulation of the pipe
• Drainage
• Grounding conductor connection
• Correct operation (follow the steps below)
2 Press the button and check the following:
• The indicator on the indoor unit lights up.
• The airflow blade opens and the fan gears up for
operation.
3 Press any button and check the following:
• The appropriate indicator lights up and the air
conditioner operates according to the selected mode
or function.
4 Press the button and check the following:
• The airflow blades work properly.
Step 18 Providing information for
user
After finishing the installation of the air conditioner,
you should explain the following to the user. Refer to
appropriate pages in the user & installation manual.
1 How to start and stop the air conditioner
2 How to select the modes and functions
3 How to adjust the temperature and fan speed
4 How to adjust the airflow direction
5 How to set the timers
6 How to clean and replace the filters
NOTE
• When you complete the installation successfully, hand
over the user & installation manual to the user for
storage in a handy and safe place.