Samson TROVIS 6495-2, Mounting And Operating Instructions

Page: 156 / 186

16-46 EB 6495-2 EN
Annex A (configuration guide)
O.1 Analog output AO1
Default
setting
Setting
-36 [2] Abs. error signal |e| <M.1-3/-4/-5/-6>
-37 Output master controller YM <M.1-3>
-38
Y1*Y2*AO1.KM/100 < M.1-5/-6>
-39
(100–Y1)*Y2*AO1.KM/100 <M.1-5/-6>
AO1.FX Constant output value <O.1.1-4> [–10.0 ... 110.0 %] 0.0 %
A01.KM Constant, mixing operation <O.1.1-38/-
39>
[0.0 … 100.0] 1.0
O.1.2 Output signal <O.1.1≠0> O.1.2-1
-1 4-20 mA
-2 0-20 mA
-3
0-10 V
-4
2-10 V
AO1.MIN Minimum output value [–10.0 ... 110.0 %] 0.0 %
AO1.MAX Maximum output value [–10.0 ... 110.0 %] 100.0 %
O.1.3 Operating direction <O.1.1≠0> O.1.3-1
-1
Increasing
-2
Decreasing
AO1.P1 Y value for AO1=AO1.MIN <O.1.3-1>
Y value for AO1=AO1.MAX <O.1.3-2>
[–10.0 ... 110.0 %] 0.0 %
The default value of AO1.P1 is the same as AO1.MIN .
If AO1.MIN is changed, AO1.P1 is set to AO1.MIN .
AO1.P2 Y value for AO1=AO1.MAX <O.1.3-1>
Y value for AO1=AO1.MIN <O.1.3-2>
[–10.0 ... 110.0 %] 100.0 %
The default value of AO1.P2 is the same as AO1.MAX .
If AO1.MAX is changed, AO1.P2 is set to AO1.MAX .
O.1.4 Output ramp <O.1.1≠0, O.1.5-0> O.1.4-1
-0
Off
-1 Start with DI1
-2 Start with DI2
-3
Start with DI3
-4
Start with DI4
AO1.GD Gradient <O.1.4≠0> [0.1 ... 100.0 %] 1.0 %
AO1.TB Time base <O.1.4≠0> [s, min, h] s
AO1.ST Initial value <O.1.4≠0> [–10.0 ... 110.0 %] 0.0 %