Samson TROVIS 6495-2, Mounting And Operating Instructions

Page: 118 / 186

16-8 EB 6495-2 EN
Annex A (configuration guide)
I.3 Analog input AI3
Default
setting
Setting
-12
t/h Mass flow
<not with I.3.1-6/-7>
-13
lb/h Mass flow
<not with I.3.1-6/-7>
-14
%
<not with I.3.1-6/-7>
-15 mFS Filling level <not with I.3.1-6/-7>
-16 mmFS Filling level <not with I.3.1-6/-7>
-17
inH
2
O Filling level (inch water
column)
<not with I.3.1-6/-7>
-18 %rF Relative humidity <not with I.3.1-6/-7>
-19 kg/m³ Density <not with I.3.1-6/-7>
-20
pH pH
<not with I.3.1-6/-7>
I.3.4 Input signal increase/decrease I.3.4-0
-0 Off
-1 On
AI3.COR Correction value <I.3.4-1> [–999.0…9999.0] 0.0
I.3.5 Signal monitoring I.3.5-0
-0
Off
-1
On
-2 On (with default value)
AI3.K1 Default value <I.3.5-2> · Initial value <I.3.1-
5>
[–999.0…9999.0] 0.0
AI3.TOUT Timeout interface <I.3.1-5, I.3.5≠0> [1…99999 s] 60 s
I.3.6 Manual mode Controller [1] upon signal failure <I.3.5≠0> I.3.6-0
-0
Off
-1
Constant output value at AO1
<O.1.1-1>
-2
Constant output value at AO2
<O.2.1-1>
-3
Constant output value at AO3
<O.3.1-1>
-4 Constant output value at AO1 <O.4.1-1>
-5 Constant output value at SO2 <O.5.1-1>
-6
With last output value
<O.1.1-1/O.2.1-1/O.3.1-1/
O.4.1-1/O.5.1-1>
AO1.K1 Constant output value at AO1 <I.3.6-1> [–10.0 ... 110.0 %] 0.0 %
AO2.K1 Constant output value at AO2 <I.3.6-2> [–10.0 ... 110.0 %] 0.0 %
AO3.K1 Constant output value at AO3 <I.3.6-3> [–10.0 ... 110.0 %] 0.0 %
SO1.K1 Constant output value at SO1 <I.3.6-4> [–10.0 ... 110.0 %] 0.0 %
SO2.K1 Constant output value at SO2 <I.3.6-5> [–10.0 ... 110.0 %] 0.0 %