Samson TROVIS 6495-2, Mounting And Operating Instructions

Page: 119 / 186

EB 6495-2 EN 16-9
Annex A (configuration guide)
I.3 Analog input AI3
Default
setting
Setting
I.3.7 Manual mode Controller [2] upon signal failure I.3.7-0
<M.1-5/-6, I.3.5≠0>
-0
Off
-1
Constant output value at AO1
<O.1.1-2>
-2
Constant output value at AO2
<O.2.1-2>
-3
Constant output value at AO3
<O.3.1-2>
-4 Constant output value at AO1 <O.4.1-2>
-5 Constant output value at SO2 <O.5.1-2>
-6
With last output value
<O.1.1-2/O.2.1-2/O.3.1-2/
O.4.1-2/O.5.1-2>
AO1.K1 Constant output value at AO1 <I.3.7-1> [–10.0 ... 110.0 %] 0.0 %
AO2.K1 Constant output value at AO2 <I.3.7-2> [–10.0 ... 110.0 %] 0.0 %
AO3.K1 Constant output value at AO3 <I.3.7-3> [–10.0 ... 110.0 %] 0.0 %
SO1.K1 Constant output value at SO1 <I.3.7-4> [–10.0 ... 110.0 %] 0.0 %
SO2.K1 Constant output value at SO2 <I.3.7-5> [–10.0 ... 110.0 %] 0.0 %
I.4 Analog input AI4 Default
setting
Setting
I.4.1 Input signal I.4.1-1
-1
4–20 mA <both DIP switches on right: mA/V>
-2
0–20 mA <both DIP switches on right: mA/V>
-3
0–10 V <both DIP switches on right: mA/V>
-4
2–10 V <both DIP switches on right: mA/V>
-5 Via interface
-6 Pt 100 <both DIP switches on left: Pt 100/Pt 1000>
-7
Pt 1000 <both DIP switches on left: Pt 100/Pt 1000>
AI4.MIN Lower measuring range value [–999.0... 9999.0] 0.0
AI4.MAX Upper measuring range value [–999.0... 9999.0] 100.0
AI4.K1 Initial value <I.4.1-5> · Default value <I.4.5-
2>
[–999.0... 9999.0] 0.0
I.4.2 Decimal point I.4.2-1
-0
XXXX No decimal place
-1
XXX.X 1 decimal place
-2
XX.XX 2 decimal places
-3
X.XXX 3 decimal places