Samson TROVIS 6495-2, Mounting And Operating Instructions

Page: 134 / 186

16-24 EB 6495-2 EN
Annex A (configuration guide)
Con-
troller
C.2.3 Set point ramp function
Default
setting
Setting
[1] [2]
C.2.3.1 Set point ramp C.2.3.1-0
[1] [2]
-0
Off
[1] [2]
-1
Start with DI1, SP=PV
[1] [2] -2 Start with DI2, SP=PV
[1] [2] -3 Start with DI3, SP=PV
[1] [2]
-4
Start with DI4, SP=PV
[1] [2]
-5
Start with DI1, SP=SP.ST
[1] [2]
-6
Start with DI2, SP=SP.ST
[1] [2]
-7
Start with DI3, SP=SP.ST
[1] [2] -8 Start with DI4, SP=SP.ST
[1] [2] -9 Continuously active
[1] [2]
SP.GD Gradient <C.2.3.1≠0> [0.0 ... 9999.0] 1.0
[1] [2]
SP.TB Time base <C.2.3.1≠0> [s, min, h] s
[1] [2]
SP.ST Initial set point
<C.2.3.1-5/-6/-7/-8>
[–999.0 ... 9999.0] 0.0
[1] [2] SP.RH Hold set point ramp at devia-
tion band <C.2.3.1≠0> [0.1 ... 1000.0 %] 1000.0 %
Firmware version 1.11 and lower: [0.1 ... 100.0 %] 100.0 %
C.2.3.2 Hold set point ramp with DI <C.2.3.1≠0> C.2.3.2-0
[1] [2]
-0
Off
[1] [2]
-1
With digital input DI1
[1] [2]
-2
With digital input DI2
[1] [2]
-3
With digital input DI3
[1] [2] -4 With digital input DI4
Con-
troller
C.2.4 Additional set point functions Default
setting
Setting
[1] [2]
C.2.4.1 Valuate external set point SPE <C.2.1.2≠0> C.2.3.2-0
[1] [2] -0 Off
[1] [2]
-1
On
[1] [2] K1
Valuation: SPE′ = SPE*K1+K2
<C.2.4.1-1> [–100.00 ... 100.00] 1.00
[1] [2] K2
Valuation: SPE′ = SPE*K1+K2
<C.2.4.1-1> [–9999.0 ... 9999.0] 0.0