Samson SAM HOME, Mounting And Operating Instructions

Page: 30 / 82

6-2 EB 5660 EN
Start-up
Î
Use a network cable to connect the SAM HOME
Gateway to the Internet.
The SAM HOME Gateway automatically attempts to
establish connection to the SAM DISTRICT ENERGY
portal. This process may take up to two minutes.
LED Status
Power ON
Portal ON (blinking)
Î
Log in to the SAM DISTRICT ENERGY web portal using your personal login data
(
u
EB 6901).
Î
Register the SAM HOME Gateway using the MAC address of the device (visible on
the housing, starting with
00:E0:99:Fx:xx:xx ).
For reasons of data security, the device must be registered in the web portal within six
hours after the device has been started.
Restarting the gateway resets this time and allows the device to be registered after a
timeout.
Settings, such as the utility meter settings (primary address, readout type and cycle), can be
configured directly in SAM DISTRICT ENERGY (
u
EB 6901) . Additional settings (including
settings in the expert mode) and the debugging function are performed using the SAM
Gateway Configurator tool. These settings can be made on a computer and transferred
afterwards to the device.
Note