Samson SAM HOME, Mounting And Operating Instructions

Page: 25 / 82

EB 5660 EN 5-5
Installation
The terminal compartment is located in the base of the gateway. To feed through cables,
break through the holes in the marked locations at the top or bottom at the base housing and
fit grommets or suitable cable glands. Ensure that the cables are not subject to torsion or
bending by taking suitable precautions before inserting the cable.
1
2
3
4
5
6
7
8
9
10
9
10
13
10
11
12
-Bus
RS485
GB (optional)
A
B
+ – AI1
0..10V in
+ –
AO
0..10V/PWM out
L1
L1
N
DO
18
19
20
21
22
AI1
Pt1000
DI2
DI1
N
L1
L1
21
20
19
18
230V
22
Fig. 5-1: Electrical connection of the SAM HOME Gateway
The terminals 6, 8 and 10 of the analog input, analog output and the binary inputs are con -
nected to each other as reference potential.
Supply voltage
Î
Connect the supply voltage to the terminals 18 and 19 in the base of the gateway.
Controller connection RS-232
One single SAMSON TROVIS 5576 or 5579 Controller, or alternatively another device that
has an RS-232 interface, can be connected to the RS-232 port of the SAM HOME Gateway.
Do not activate the modem operation function of a connected controller.
Exception : fault
alarm of a separately connected controller with the modem/controller setting (TAP-SMS).
Note