Samson SAM HOME, Mounting And Operating Instructions

Page: 67 / 82

EB 5660 EN 12-1
Removal
12 Removal
The work described in this section is only to be performed by personnel appropriately quali-
fied to carry out such tasks.
Risk of fatal injury due to electric shock.
Î
Only allow trained and experienced personnel to perform the work.
Î
Before disconnecting live wires, switch off the supply voltage and protect it against unin -
tentional reconnection.
1. Undo the screws on the front cover.
2. Carefully pull the gateway device off the base.
3. Remove the PCB on which the SIM card is mounted.
4. Disconnect the wires (supply voltage) at terminals 18 and 19.
5. Disconnect all wires of the externally fed cables from the terminals.
6.
Remove grommets or cable glands fitted at the cable entry and pull the cables out of the
terminal compartment.
Panel mounting
Î
Push the base through the panel cut-out.
Rail mounting
Î
Slightly push the base upwards, pull the top hook out of the top hat rail and remove the
base.
Wall mounting
Î
Unscrew the base.
DANGER !