SamplexPower EVO-30AB, Owner'S Manual

Page: 5 / 96

4 | SAMLEX AMERICA INC. SAMLEX AMERICA INC. | 5
SECTION 1 | SAFETY INSTRUCTIONS
Read instructions before installing or operating the Charge Controller to prevent per-
sonal injury and avoid damage to the Charge Controller.
1.1 Installation and Wiring Compliance
• Installation and wiring must comply with the local and National Electrical
Codes and must be done by a certified electrician.
1.2 Preventing Electrical Shock
• The negative system conductor should be properly grounded. Grounding
should comply with local codes.
• Disassembly / repair should be carried out by qualified personnel only.
• Disconnect all input and output connections before working on any circuits
associated with the Charge Controller.
1.3 Installation Environment
• The Charge Controller should be installed in a well ventilated, cool, dry
environment.
• Do not expose to moisture, rain, snow or liquids of any type.
1.4 Preventing Fire and Explosion Hazards
• Working with the Charge Controller may produce arcs or sparks. Thus, the
Charge Controller should not be used in areas where there are flammable
materials or gases requiring ignition protected equipment. These areas may
include spaces containing gasoline powered machinery, fuel tanks, battery
compartments.