SamplexPower EVO-30AB, Owner'S Manual

Page: 28 / 96

28 | SAMLEX AMERICA INC.
Fault LED (4) – Red LED indicator for indicating fault conditions. Will be ON during
fault conditions.
Navigation Keys (5,6,7,8) – these four keys allow simple access to Menu Items that
assist in monitoring and troubleshooting the EVO-30AB.
• Back – no effect when EVO-30AB is in the only device connected. Otherwise,
use to move from main EVO
TM
Inverter/Charger Screen to EVO-30AB screen when
EVO
TM
Inverter/Charger is connected.
• Up – Scroll up through the menu items.
• Down – Scroll down through the menu items.
• Enter – Select/Write a particular value or option.
SD Card Slot (9) – This slot supports SD memory card (up to 32GB, FAT 16/32). The SD
Card is used for data logging of EVO
TM connected devices. The following fields are
captured into the log: Date and Time
• Battery Voltage
• Current
• Heatsink Temperature
• Charge Stage
• Alarms
See Section 5 of the EVO-RC-PLUS manual for details on data logging.
5.3.2 EVO-RC-PLUS Display Screens
Startup Screen
When the EVO-RC-PLUS is connected to an operational EVO-30AB, the following start
up screen will be observed.
S e a r c h i n g I D . . . . . .
E V O - 3 0 A B
S O L A R C H A R G E R
V E R 1 . 0 6 I D = 6 4
Figure 5.3: Startup Screen
The controller will indicate “EVO-30AB” on the second line and establish a connection.
VER: Indicates the firmware version of the EVO-30AB
SECTION 5 | CONSTRUCTION, LAYOUT & CONTROLS