Sames Inocoat Inocenter Instruction Manual Download Page 6

Page: 6 / 58

Member of Exel group

DRT7142

B - 2023/06

1. Health and safety instructions

This manual contains links to the following instructions manuals:

•

see DRT6454

for

Inotransfer

•

see DRT6457

for

Inomaster Platinum

1.1. Marking

The

Inocenter

is intended for use out of an explosive atmosphere.

1.2. Compliance with the ATEX directives

According to Directives 1999/92/EC and Dangerous Substances and Explosive Atmospheres Regulations 2002,

the responsibility for defining ATEX zones lies with the user. In accordance with the EN 16985 Standard,

Sames

has designed the

Inocenter

considering the following zones:

• Zone 20 for the inner volume of the powder fluidized tank.

• Zone 22 for the inner volume of the enclosure and the evacuation sheath.

DES08062

DES08059

Zone 22

Zone 20

Summary of Contents for Inocoat Inocenter



























































Search results

Summary of Contents for Inocoat Inocenter

Reviews:

Related manuals for Inocoat Inocenter

Brands by name

Popular brands

Sames Inocoat Inocenter, Instruction Manual

Search results

Summary of Contents for Inocoat Inocenter

Reviews:

Related manuals for Inocoat Inocenter

Brands by name

Popular brands