Doc.-ID: 180516-PT10BA-ES-RoughCam IPM1145-(L)_en_rev.01.docx, page 7 of 40
I
max
> 8000mA !
The typical in-rush-duration for I
PTC
< 1000mA per module is t
ON
≤ 45s
The typical in-rush-duration for I
PTC
< 500mA per module is t
ON
≤ 120s
(saturated range/ steady current)
2.3
Connection cable SKD01-T
Description:
Samcon System Cable Digital (type
„SKD01-T“)
for low temperature ranges, data transfer and
power supply of the camera modules M1145
and M1145-L
Sheath color:
Yellow-green (GN), similar RAL6018
Outer diameter:
9.1 ± 0.2mm
Wall thickness:
1.0 ± 0.1mm
Bending radius:
10 x outer diameter at installation
5 x outer diameter after installation
Tensile:
Max. 140N
Temperature range:
-10° C to +50° C (at point of installation)
-60° C to +80° C (fixed installed)
Conductor design:
4 x 2 x AWG22/1 blank, CAT.6a
Isolation:
SFS-PE foamed
Core diameter:
1.52 ± 0.02 mm
Color code:
IEC 708-1
Pair shielding:
Compound aluminum foil
Shielding:
Copper braid, multiple wires 0-10 vz, opt. cov-
erage approx. 85%
Outer sheath:
PUR FHF
Characteristics:
PUR halogen free, flame resistant (EN 60332-
1-2), UV and ozone resistant, high chemical re-
sistance, EMV shielded
(q.v. www.samcon.eu, data sheet SKD02-T)
User interface:
P
(Plug) version: RJ-45 Stecker (EIA/TIA-
568B), e.g. Weidmüller IE-PS-RJ45-FH-BK,
Phoenix Contact VS-08-RJ45-5-Q/IP20 etc.,
10BASE-T/100BASE-TX PoE
K
(terminal block) version: about 12 cm stripped:
8 x single conductors twisted pair (solid conduc-
tor A=0.33mm
2
, ø=0.64 mm approx. 6 mm
stripped), 1 x shield (Cu braid tinned 1.5 mm
2
,
ferule color code according to DIN 46228)
10BASE-T/ 100BASE-TX PoE
