Doc.-ID: 180516-PT10BA-ES-RoughCam IPM1145-(L)_en_rev.01.docx, page 18 of 40
Figure 5.4
– RoughCam IPM1145-(L) T10-VA2.1.K1.BOR-XXX-
P
-X
Figure 5.5
– RoughCam IPM1145-(L) T10-VA2.1.K1.BOR-XXX-X-
L(L)
RoughCam IPM1145(-L)
Use PoE PSE for 802.3at type 1 class 3 or
Use PoE PSE for 802.3at type 2 class 4 (30W)
RoughCam IPM1145(-L) PoE+
Use PoE PSE for 802.3at type 2 class 4 (30W)
Via the 8 (+1) -wire green patch cable SKD01-T, the communication and the data transfer
to connected network devices as well as the power supply (PoE) of the camera is carried
out. In order to guarantee the power supply (Power Device, PD) of the RoughCam
IPM1145-(L), a Power-over-Ethernet component (Power Sourcing Equipment, PSE) has
to be available at the connecting side (e.g. a PoE Switch, a PoE Injector, or Midspan)
