Doc.-ID: 180516-PT10BA-ES-RoughCam IPM1145-(L)_en_rev.01.docx, page 24 of 40
IPM1145
IPM1145-L
Lens type
Vario-Focus-lens, integrated infrared cut filter, lens fixed installed in
the module (no CS mount), motorized remote zoom and remote focus
Lens
P-Iris, F1.4 / f3.0
– 10.5 mm
Aspherical technology
Nein
Focal distance
3.0
– 10.5 mm
Horizontal angle of view
95°(wide)
– 34°(tele)
Iris control
Precision-automatic
MOD (Minimum object distance)
0.30 m (wide) / 1.00 m (tele)
Table 5.6
– Lens data
Information!
If not determined differently, the default setting for the RoughCam
®
IPM1145-(L) is set to maximum sensor resolution (HDTV 1080p/ 16:9)
and low picture compression (high picture quality, high bandwidth re-
quirement). The focus is optimized for a distance of approx. 10 m
It is possible to individually adjust the RoughCam IPM1145-(L) set-
tings to meet the requirements of objects, environmental conditions,
or network and hardware performances. The same is valid for pass-
words, user names, streaming profiles, or IP addresses etc. which can
also be pre-configured
5.4.1
Work preparation
Attention!
Please carry out any preoperational work carefully and in accordance
with the applicable regulations.
For the network camera to deliver the best picture quality possible, please select the
appropriate installation place; considering the light conditions, object distance and size,
angle of view and the minimum object distance for focusing (MOD).
Use appropriate tools
Make sure you have a secure foothold
Avoid static charge
